* If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you. Learn more.
Nowadays, having a great cordless framing nailer is as essential to a hobbyist as it is to a professional. Having one ta your workshop is a great plus to your work and its progress.
However, if you buy a cordless nail gun that is not durable, you will be wasting a good amount of money. That is to say, not all cordless framing nailers on the market nowadays are worth your money.
If you need to know how to buy the best cordless framing nailer, read the following article, and get some helpful information.
Our Top Picks
|Check Current Price
|Check Current Price
|Check Current Price
|BOSTITCH 20V Max
|Check Current Price
|Check Current Price
|Check Current Price
|Check Current Price
|Check Current Price
Table of Contents
The 8 Best Cordless Framing Nailer
1. Paslode 905600 – Cordless Framing Nailer
This is the new model of the powerful Paslode 902600. It runs on a 7-Volt Li-ion battery and a fuel canister.
What is impressive about it is that it can push 9000 nails in a single charge, which means that a single charge lasts for about 90 minutes. This is great if you want to work on long projects because you will not need to charge regularly. Moreover, one canister lasts for 1,200 nails.
Paslode 905600 can take nails between 2” and 3.25” long, and it has 30° angled round head paper collated nails available in bright and hot-dipped galvanized varieties.
It has all the features that a high-end framing nailer should have, such as the tool-less depth adjustment and tool-less jam clearing, which will make the depth adjusting and jam clearing processes very easy.
It is not only lightweight, but it also has an ergonomic handle, so it will not strain your hands even if you use it for a long time. Moreover, its compact frame allows you to use it in tight areas and not easily accessible places. It also comes with a heavy-duty rafter hook.
Its downside is that it is expensive.
- Tool-less depth adjustment
- Tool-less jam clearing
- 2-year service promise and 5-year limited warranty
- Paper collated nails
- Battery and charger included
- High operating cost
Paslode 905600 is a great framing nailer for its lightweight, compact size, power, and other great features. It is also excellent to use if you are working in a situation where you cannot work with a compressor.
- Increased Productivity - Drives nails flush in LVL and other hardwoods that remodelers encounter.
- All Season Formula - Works in temperatures down to 14°F.
- Lightweight - 7.2lbs. for better comfort and control while working overhead or in tight spaces.
- Guaranteed Durability 50% Longer Run-time with 7V Li-ion Battery for up to 9,000 nails per charge.
2. Dewalt Dcn692B – Cordless Framing Nailer
The 20-Volt DeWalt DCN692B has a brushless motor that can drive nails ranging from 2 inches to 3-1/2 inches long. It also has the power to drive nails almost 4 inches deep.
It is a great framing nailer because it has both sequential and bumps modes. Use the sequential mode if you need precision in placement, and bump mode if you need to finish the job at hand quickly. Moreover, this feature optimizes it for all fastener lengths, so that there is less recoil. DeWalt DCN692B also has many shots per change.
The 33-degree magazine of this power tool can hold up to 55 paper collated nails, which means it can take up a considerable number of nails and can be used in tight places.
If you are worried about jamming, which will happen, do not worry anymore because DeWalt DCN692B has a nose cap that is easy to access to help you remove jammed nails safely and simply.
You can use DeWalt DCN692B with heavy-duty tasks as it provides users with high speed and accurate placement of nails whenever the trigger is pressed.
Besides, for your safety, the top cap is impact-resistant.
- Handles heavy-duty tasks
- Accurate placement of nails
- Lightweight (8 pounds)
- Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
- Might break down quickly
DeWalt DCN692B is a reliable tool even if you need it to finish heavy-duty tasks. Its dual mode gives you the freedom of choice, and its top cap adds to your safety. It also has other features that make it appealing.
- DEWALT cordless framing nailer has dual-speed motor optimized to drive a wide range of fasteners for versatility
- Framing nailer gun has tool-free selector switch for sequential or bump-fire modes
- Tool-free depth adjustment for precise nail placement
- Stall release lever to reset driver blade in the event of a jam
3. Dewalt 20V Max Xr – Nail Gun
DeWalt 20V Max XR is a contractor’s tool thanks to its ability to do heavy-duty tasks and the long-lasting brushless motor that enables it to drive 3 1/2″ nails.
It has a 33-degree magazine that holds up to 55 paper collated nails.
Moreover, it is easy to use, so you will not have any trouble trying to figure it out. Its trigger offers sequential and bumps modes, and its Dual Speed ensures an optimized motor for varying nail length and depth demands.
Besides, it has a trigger lock-off that increases safety and minimizes tool damage.
Unfortunately, it regularly gets jammed, but there is a nosepiece that is easy to access if a jam occurs.
- Can perform heavy-duty tasks
- Easy nosepiece access
- Brushless motor
- Sequential or bump operation
- Dual speed
- Integrated belt hook
- Gets easily jammed
Dewalt 20V Max XR is an excellent tool for contractors because it is excellent for performing heavy-duty tasks.
- DCD996 20V MAX 1/2-inch hammerdrill 3-speed, high performance (0-2,250 rpm), all-metal transmission optimizes tool-to-task...
- DCD996 20V MAX 1/2-inch hammerdrill 0-38,250 BPM in the cordless tools combo kit is made for fast drilling in masonry...
- DCD996 20V MAX 1/2-inch hammerdrill in the drill/impact driver combo kit has a compact size (8.4 inch front-to-back length)...
- DCD996 20V MAX hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20 times brighter than...
4.Bostitch 20V Max – Nail Gun
It comes with a brushless motor that can drive 18ga Brad nails from 5/8″ to 2-1/8″ in length.
It also has a narrow nose that provides the user with a clear line of sight, and therefore, an accurate placement of the nails.
Moreover, it comes with an LED light that enables you to work in relatively dim places- this is not recommended, though, as it compromises your safety.
Adding to all its comfort-providing features, it has a tool-less jam release to easily and quickly clear jam.
It is suitable for decorative and stair moldings, door, window, and staircases, for example
- LED light
- Tool-less jam release
- Narrow nose
- Relatively expensive
A great framing nailer for its powerful motor, and comfort-providing features.
- Cordless brand nailer drives 18 GA brad nails from 5/8-inch to 2-1/8-inch length
- Narrow nose of the 18 gauge brad nailer is designed for clear line of sight and accuracy of nail placement
- Battery brad nailer features tool-free depth adjustment for precise countersinking of nails
- Tool-free selector switch for sequential or contact actuation modes
5.Hitachi Nr1890Dr – Cordless Nailer
This 10.1-pound framing nailer, although heavy, is a great tool to own because it gets your job done quickly and excellently.
Hitachi NR1890DR gives you the chance of choosing between the sequential mode if you need precision, and the bump mode, if you care more about speed. It also has a 21° magazine that can carry 37 plastic strips of collated fasteners. It accepts fasteners between 2 inches and 3 1/2 inches in length.
This powerful drill does not require a fuel rod of any form so that it will burn through battery fairly quickly. Moreover, it can shoot about 400 nails on one single charge.
It has a zero ramp-up time and high driving speed thanks to the Air Spring Drive System that uses compressed air to drive each nail.
For your safety and comfort, Hitachi NR1890DR has a lockout system to ensure that the nailer fires no more nails when their count gets low. Moreover, there is a swivel hook on the end, so that you can hang it on your belt, for example, if you need both your hands to be free.
- Comes with a charger, a carrying bag, a battery, and safety glasses
- High performance
- Takes almost no time to charge up before firing the nail
- It is set at 21 degrees
- Does not shoot a lot of nails on a single battery charge
- The magazine is a bit small
Hitachi NR1890DR is a reliable framing nailer to buy. It is backed with some great features, among which are its swivel hook, lockout system, and Air Spring Drive System. However, it is really heavy, so you should consider this before buying it.
- Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
- Unique Air Spring Drive System that uses compressed air to drive each nail resulting in zero ramp up time and increased...
- Brushless motor for longer run time per charge, less maintenance and increased durability
- Powered by a Compact 3.0Ah Lithium Ion battery that is 3/4 inches shorter and .6 pounds lighter than a conventional 3.0Ah...
6. Bostitch F21Pl Framing Nailer – Great Electric Framing Nailer
This 21-degree Plastic Collated Framing Nailer is very special because it is a two-in-one kind of tool. Bostitch F21PL has two nose pieces that you can quickly change; such nosepieces can turn the tool from a framing nailer into a positive placement nailer and vice versa.
A positive placement nailer will help people who work with metal connectors. With a positive placement nailer, working with metal connectors will no longer be a difficult task because a positive placement nailer tip is a special kind of tip that can fit into the connector’s holes.
Even if you are working on blind areas, it will still be easy because you feel the tip falls into the hole, so nailing connectors are quick and easy.
It holds up to 60 plastic collated 21-degree framing nails ranging from 2 to 3.5 inches, and 60 metal connector nails ranging between 1.5 to 2.5 inches.
Moreover, it has some great features like tool-less depth adjustment, tool-less jam clearing that make the processes of adjusting the depth of the nails and clearing jams a whole lot easier.
It also comes with an adjustable rafter hook, so that you can hang it on anything to free both your hands.
Sadly, it does not have an actuation mode selector, no anti-dry fire mechanism, and it comes with plastic collated nails.
- 7-lear limited warranty and a 1-year full warranty
- Adjustable rafter hook
- Tool-less jam clearing
- Tool-less depth adjustment
- Two-in-one power tool
- Very lightweight
- Positive placement tip
- Driving Power 1050 Inch Lbs.
- No actuation mode selector
- No anti-dry fire mechanism
- Plastic collated nails
If you want a framing nailer and a positive placement nailer at an affordable price, this should be your choice. You can rely on Bostitch F21PL in heavy-duty tasks as well as DIY tasks. It comes with great features like tool-less jam clearing and so. However, notice that it does not have an actuation mode selector or an anti-dry fire mechanism.
- Two nailers in one: includes two quick change nosepieces to convert tool to either framing or metal connector applications
- Patented push button adjustable depth guide of the framing nailer gun sets nails to desired depths
- Lightweight magnesium design for durability
- Adjustable rafter hook allows users to hang tool on rafters and joists
7. Metabo Hpt Nr1890Dr – Best Framing Nailer For Diy Projects
The 18-volt framing nailer comes with a brushless motor that provides it with longer run-time per charge, less maintenance, as well as increases its durability.
Moreover, it has a 21-degree magazine, which is easily maneuverable and will prove handy in corner work. Sadly, though, the magazine can hold no more than 37 nails, which means that you will need to refill it more often than you would like. The framing nailer is compatible with nails that are 2 inches through 3 ½ inches in length.
Moreover, the battery can shoot 400 nails on a single charge, which is very suitable for working at home or on DIY projects. However, if you are going to use it on large projects, I would recommend you get another battery along with the one that already comes with the tool.
Besides, it has a rotating rafter hook, so you can hang it whenever and wherever you need when you want both your hands to be free for any reason. It comes with a battery, a charger, and a bag that has room for storing the charger and our safety glasses
- It has a dry fire lockout, which is a great safety feature
- It comes with a lot of stuff
- The magazine sits at 21 degrees
- Only shoots 400 nails per charge
- Small magazine
Metabo HPT NR1890 DR is an excellent tool for small projects because its magazine capacity and the number of nails it shoots per charge are not very suitable for large projects. However, it is reliable, durable, and safe.
- INCLUDED: NR1890DRS, Compact 3. 0Ah Lithium Ion Battery, Fast Charger, Contractor Bag, Safety Glasses
- CORDLESS FREEDOM: Pneumatic power with 18 volt cordless freedom
- FASTENERS: Accepts round head 21 degree plastic strip collated nails from 2 Inch up to 3-1/2 inch in length and (0.113 to...
- POWER: Drives 400 Nails per charge using Metabo HPT's new compact 3.0 Ah Li-ion battery(included)
8. Bostitch Bcf30P1 – Cordless Framing Nail Gun
This 20-volt framing nailer comes with a brushless motor that has two speeds. This, of course, gives it more power and offers optimized performance.
It has enough power to drive 3 1/2 inch fasteners, and it is compatible with clipped and full round head nails in 30-degree paper tape collation.
Since jamming cannot be avoided, Bostitch BCF30P1 comes with a stall release lever that enables you to reset the driver blade in case of a jam.
Its uses include but are not limited to framing, sheathing, deck building, and fencing.
- 20 volt s
- Stall release lever
- 3-year limited warranty
- Jams a lot
This is a fair framing nailer that is more suitable for DIY projects than it is for heavy-duty tasks.
- Cordless framing nailer features tool-free selector switch for sequential and contact-actuation modes
- Brushless motor and engine design of the framing nailer gun includes two speeds for optimized performance and enough power to...
- Stall release lever to reset driver blade in case of jam
How to Pick a Cordless Framing Nailer?
Weight and Size
The weight and size of your nailer depend on the type of projects you are engaged in. Indeed, all cordless framing nailers are lighter than their corded counterparts; however, they still have various weights.
If you are going to use your nailer for extended periods of time or if you are going to use it for over-the-head tasks, I would recommend you get a lightweight one. You should only get a heavier one in case it has other features that you need that the lightweight one lacks. However, this is not very common to happen.
On the other hand, if you will rarely use it or if you will use it for short periods, then a relatively heavy cordless framing nailer will not do you much harm.
Speaking of the size, the more compact the nailer is, the higher the chance of being able to use it for tasks in tight places.
Cordless framing nailers lie within a wide range of different prices. The high-end nailers are those with the highest price; whereas, the ones with fewer features have relatively low prices.
However, it is important to realize that you should not get a high-end nailer if your needs do not require one.
For instance, get a low-priced one if you need it for tasks around the house or for DIY jobs that are not heavy-duty.
A higher model would be suitable for consistent high-capacity usage because if you are going to use it daily to shoot thousands of nails, then you need a model that can endure such heavy work.
The magazine capacity is the number of nails that the magazine can hold. Usually, cordless nailers have smaller magazines to be more lightweight than corded ones.
You should get a cordless framing nailer with a huge magazine capacity if you are going to work on long projects. It would be incredibly frustrating to need to stop mid-work to add nailers.
However, if you will work on small projects, the capacity of the magazine will not be an issue at all.
The magazine angle refers to the angle the magazine makes relative to the ground when you hold the nailer upright. If you need to be able to reach places that are so tight or hard to reach, aim for a nailer with a greater magazine angle.
If you mostly work with the machine in its upright position, a 21-degree angle is good enough. But, if you know you will work in tight places, you better get a nailer at a 33-degree magazine angle.
Note, though, that the cost of operating the machine is directly proportional to the size of the angle because the value of the nails gets more expensive.
There are two types of magazines. The common one is the stick magazine, and the other is the coil type. Each comes with its pros and cons.
The coil type can carry more nails than the stick type; however, it is cumbersome and gets in your way if you work at an angle.
So, I’d say that you should go for a coil type if you will not work at an angle, but if you won’t, then the stick type is better.
It is usually normal when nails get jammed. If your nailer allows you to clear jam without using any tools, you won’t get frustrated.
The actuation mode allows you to set the mode of firing the nailers. There are two modes; sequential actuation and pump actuation.
Sequential actuation lets the nailer fire one nail each time you press the trigger; while in bump actuation mode if you keep the trigger pressed, the nailer fires one nail each time you bump the contact tip against the surface. So, the bump actuation mode is more efficient and lets you finish your task faster.
It would be great to get a machine that allows you to switch between the two modes.
This feature adjusts the depth of the nails. Getting a framing nailer that has tool-less depth adjustment will save you a lot of time and hassle.
Like any electronic device, batteries get depleted and need recharging. Getting a nailer with a longer life battery is, of course, great; however, if you already have one with a short-life battery, or if you cannot get one with a long-life battery, it is totally okay. This is because you can make up for this short life by having a charger with you and having a spare battery, so you can also use the spare battery until your other battery gets charged and vice versa.
Fuel Cell Rods
Some of the framing nailers use a battery and a fuel cell rod. If you need added power and longer life, insert these rods into the nailer. They increase the power to the extent that they add up to 1000 additional nail shots onto a battery. They also provide the nailer with more efficiency.
However, they add weight to the nailer, and since they are sold separately, they make the nailer more expensive than it originally is.
What Should You Look For When You Are Selecting Nails?
Each framing nailer accommodates a specific range of nail size, so you should check the range that your nailer accommodates. For framing purposes, carpenters use 3.5-inch nails, so you should make sure that your nailer accommodates the 3.5-inch nails.
Nail Head Type
There are two popular types of nail heads; clipped and round. Different types of heads require different firing mechanisms. Clipped heads occupy less space, so their cartridges carry more nails per inch. If you get clipped heads, you will increase your carrying capacity and decrease the cost you pay.
However, they are weaker than round nails, so they are not suitable for places where hurricanes usually take place. This is why it is important to check your local building codes to see whether they permit using clipped nail head types or not.
Nail collation is the method that the manufacturers use to hold the nails in a cartridge together. There are three main methods, and we will discuss them below.
This means that there is a strip of paper holding the nailers together. This method is excellent for it provides the users with the cleanest finish, and it is the safest method.
However, it is less durable and more expensive than plastic collated nails. The cartridges that are paper collated unravel easily when exposed to water.
Plastic collated nails do not provide a clean finish like the paper collated ones, and they are more dangerous because the plastic parts may jump into your face.
However, they are more durable and less expensive.
In wire weld collated nails, a thin wire tack-welded to the nails holds the cartridge together.
Similar to the plastic collated cartridges, these are expensive, dangerous, and do not produce as clean cuts as the paper collated cartridges do.
You should only get them if you work in harsh conditions because they’re incredibly durable.
Corded Vs. Cordless Framing Nailers
All framing nailers will jam if they are not properly maintained. However, the main difference between a corded and cordless framing nailer regarding the performance is the firing cycle.
A corded framing nailer will fire as soon as the trigger is pulled; however, cordless models will take time to spin up before firing.
It goes without saying that a corded framing nailer depends on an electric outlet; whereas, a cordless one depends on its battery.
The corded framing nailer will keep working as long as it is connected to a power source, if it ever stops suddenly, you will have to check if the motor has any issues, which is a time-consuming process.
On the other hand, if the cordless model stops working, it will be because the battery gets depleted. All you need to do is add the spare battery you have and recharge the depleted one. This process takes almost no time at all.
With the lowest run time, cordless nailers will still get you more than 400 shots on one charge with a compact battery. High-end cordless framing nailers can fire more than 1600 shots per charge.
Maintaining a corded framing nailer is more complicated than maintaining a cordless one. A corded nailer has many pieces that you need to check. Moreover, you must check that the hose is not leaking, and the couplers are solid. You must also check the oil level of the compressor and oil your nailer daily.
On the other hand, all you need to do with a cordless framing nailer is to check that its battery is charged.
Corded framing nailers are more lightweight than cordless ones; however, this is their only positive point when it comes to comfort.
Working with a corded framing nailer means that you are going to be limited by the length of the hose and that you may tip over its cord and fall.
Conversely, when you use a cordless framing nailer, you can work freely without being tied down to a particular area and length.
How to Use a Framing Nailer Safely
In order not to get harmed in any way, you should follow the safety instructions of using a framing nailer.
Since we are keen on keeping you safe, we have compiled some of the safety precautions that you should follow:
- Try to work in a place that is not crowded with people or things
- Read the manufacturer’s manual before you use the nailer
- Make sure that your hands and fingers are out of the line of firing
- Aim the gun away from your body
- Never carry the tool with your finger on the trigger
- Before clearing a jam or maintaining the gun, always make sure it is off
- Never point the tool at anyone even if it is empty or off
- Wear safety glasses that provide a side shield
- Consider using a sequential gun that requires both the trigger and the nose of the gun to be depressed before firing
- Wear safety boots for they prevent nails from injuring your feet
- Wear high-impact eye protection and hearing protection
- Never use it with your left hand if you are right-handed and vice versa
For What Purposes Could I Use A Cordless Framing Nailer?
The cordless framing nailer is best for trimming and finishing work, installing molding, assembling shutters or window guards, and other tasks where you don’t want to have a thick cord running up the wall.
It offers many benefits that are not possible with a pneumatic nail gun: it won’t leave an air hose dangling on the ground.
it needs no electric power source, there’s no need to fill its compressor tank after firing each round of nails like in pneumatic guns, nor does it emit exhaust fumes as they do.
In addition, these tools offer precision because they can be used off-board without needing any type of support from non-running parts such as hoses or compressors.
What Is The Most Common Framing Nailer?
The most common framing nailer is the cordless electric nail gun. This type of tool offers many benefits that are not possible with a pneumatic nail gun and it can be used off-board without needing any type of support from non-running parts such as hoses or compressors.
Because this kind of framer does not have an air hose dangling on the ground, there’s no need to fill its compressor tank after firing each round of nails like in pneumatic guns nor does it emit exhaust fumes as they do.
What Is The Difference Between A 21- And 28-Degree Framing Nailer?
A cordless framing nailer usually comes in two degrees: 21- and 28-degree. The former is the most popular for its versatility, it can be used to build anything from a roofing shingle, crown molding or door trim all the way up to sheathing boards without any problems whatsoever.
The latter offers better performance when working with hardwoods as well as cedar siding which are more prone to splitting than softwoods but at an increased cost of maintenance due to its delicate parts such as piston rods that need constant lubrication.
Can I Use 21-Degree Nails In A 30-Degree Nailer?
It is possible, but the nail will stick out of the surface that it’s being nailed to.
The best way to go about this would be by using a nail set and then setting the head flush with a metal hammer or block plane.
Can I Use A Framing Nailer For Siding?
Framing nailers are designed for framing, not siding.
You will need to purchase a roofing nailer or trim nailer if you want to use the tool for this purpose.
Choosing the best cordless framing nailer is not that difficult, after all, is it?
I’d say, if you have money, you should buy Paslode 905600 for its lightweight, power, ease of use, and other appealing features.
If you want another great one that does not break your bank get the powerful DeWalt DCN692B. Its 33-degree magazine enables you to use it in tight places. It also helps with the accurate placement of nails.